Networks & Wi-Fi
Strong, reliable Wi-Fi and network connections in every corner of your building — not just near the router.
What it is
Your network is the set of connections — wired and wireless — that carry everything in your building: computers, phones, cameras, printers, card readers and all the connected devices in between. Wi-Fi is the wireless part of it: the signal your laptops, tablets and phones use when they are not plugged in.
Cable Connexions LLC, a technology integrator based in Middle River, Maryland, has designed and built custom wireless networks since 1995, including networks for offices, warehouses, schools and industrial sites, with Internet of Things devices connected alongside them. We start with a site survey — a proper check of your building, its walls, its size and how it is used — so the network is designed for your space, not guessed at.
In plain terms: a good network means your team can work anywhere in the building, and everything stays connected.
How it works
A network has a few moving parts, and they have to be planned together:
- Your internet connection — the line coming into the building. The network distributes it to everything inside.
- The wired network — cables running through the building to wall outlets, computers, cameras, phones and access points. Wired connections are the backbone: steady, fast and reliable.
- Switches — the units that join all of those cables together and direct traffic to the right place.
- Wi-Fi access points — small units, usually mounted on ceilings or walls, that broadcast the wireless signal. A building needs enough of them, in the right places, so there are no dead spots — one router in a corner is rarely enough.
- Connected devices — everything from laptops and phones to cameras, door readers, printers and sensors. They all share the network, so it has to be planned for the number of devices you actually have.
- Security and separation — passwords and settings that keep your business network protected, and separate wireless networks for staff, guests and connected devices, so a visitor’s phone is never on the same network as your business systems.
We design the whole thing as one system, so the wired network, the Wi-Fi and the devices on it all work together.
The problems it solves
- Wi-Fi dead spots. The signal is fine in one room and gone in the next, or it drops in the warehouse, the far office or the meeting room. Properly placed access points fix that.
- Slow and unreliable connections. Video calls freeze, files take forever, and the network struggles at busy times. That is usually a network that was never designed for the number of people and devices using it.
- Too many devices, not enough network. Phones, laptops, cameras, printers and connected equipment have all been added over the years. A network planned for today’s load — with room to grow — handles them.
- Guests on your business network. Visitors, contractors and customers should not be on the same network as your business systems. Separate wireless networks keep them apart.
- Coverage that stops at the door. Yards, loading areas, outbuildings and outdoor spaces often need coverage too. Outdoor access points can extend the network where it is needed.
- Nobody knows how it is set up. A network that grew one router at a time, with passwords nobody can find, is hard to fix when it breaks. A designed network comes with clear documentation.
What you get with Cable Connexions
- A site survey first. We measure and check your building — walls, distances, dead spots and how the space is used — before anything is installed.
- A network designed for your building. The right number of access points, in the right places, with wired connections where they matter most.
- Professional installation. Cabling, access points and equipment installed neatly and properly, by the team that has been doing this work since 1995.
- A full system report. On every job, you receive a full system report: what you have, where it is, and its warranty status — for every access point, switch and related piece of equipment.
- Clear documentation. Written records of your network — what is where, how it is set up, and how to use it — so the knowledge stays with your business.
- Managed services built into your support contract. Your network can be looked after under a support contract, with regular checks and help when something needs attention.
- Work done on a handshake. We show up, do the work right, and stand behind it.
What to expect
- We walk your facility with you. We listen to where the Wi-Fi fails, where people work, and what your team needs to do online.
- We survey the site. We check signal strength, walls and distances, and work out where access points and cabling need to go.
- We design the network. You get a plain-language plan: how many access points, where they go, and what will change for your team.
- We install it. Cabling is run, access points are mounted, and the network is set up and secured.
- We test the coverage and hand over your report. We walk the building checking the signal in every area that matters, and you receive your full system report and documentation. Ongoing support is there when you need it.
Questions clients ask
How many access points will we need?
It depends on the size of your building, the walls, and how many people and devices use the network. That is what the site survey is for — we work it out from your actual building, not from a guess.
Can Wi-Fi reach our warehouse or yard?
Often, yes. Warehouses need access points placed for high ceilings and racking, and outdoor areas can be covered with outdoor access points. We check those areas during the survey.
Can visitors have their own Wi-Fi?
Yes. We set up a separate wireless network for guests, so visitors can get online without ever being on your business network.
Do we need a new internet connection?
Not necessarily. In many cases the problem is the network inside the building, not the line coming in. We will tell you plainly if your connection is part of the problem, or if it is fine as it is.
Can you fix our dead spots without rewiring everything?
Sometimes. If your cabling is in good shape, we may only need to add or move access points. If the cabling is the problem, we will say so — and explain what it would take to fix it properly.
What about all our connected devices?
They are part of the plan. Cameras, door readers, printers, phones and other connected devices are counted in when the network is designed, so it is built for the load they create.
Also see: Managed IT Services, Security Cameras and Surveillance, Access Control, Structured Cabling, Business Phone Systems, Audio Visual, Paging and Sound, Engineering and Design — or back to the Services overview.
Get in Touch!
Call Cable Connexions at (443) 224-6764 or 1-800-373-1330, or visit our Support page. Tell us what is not working, or what you would like to improve, and we will walk your facility with you.
