Engineering & Design

A plan for your technology before a single cable is run — so it works the first time.

BICSI RCDD–Led Design

Every design, drawing set, and estimate Cable Connexions produces is prepared under a BICSI Registered Communications Distribution Designer (RCDD) — our designer of record — so your project is engineered to industry standards before a single cable is pulled.

ICC Elite Installer

Cable Connexions LLC is an ICC Elite Installer, carrying end-to-end project pricing and ICC’s 15-year parts warranty on the cabling plant we install.

ICC Elite Installer logo

What it is

Engineering and design is the planning that happens before anything is installed: looking at your building, working out what technology it needs, and drawing up a clear plan — in drawings and specifications — for how it will all fit together.

Cable Connexions LLC, a technology integrator based in Middle River, Maryland, has been designing technology systems since 1995, for new buildings, renovations and existing facilities. Our team produces the drawings and documents that architects, contractors and your own team work from, so everyone is building the same system.

In plain terms: instead of buying equipment and hoping it fits, you get a plan first — and the installation follows the plan.

How it works

A design project has a few moving parts:

  • Understanding your building and your business — how the space is used, how many people work there, what they need to do, and what is likely to change in the years ahead.
  • Technology planning — deciding what systems are needed: network and Wi-Fi, cabling, phones, cameras, access control, audio visual and paging — and how they will work together as one system, not as separate pieces.
  • Drawings — plans showing where equipment goes, where cables run, where outlets, cameras, speakers and access points are placed, and where the central equipment sits.
  • Specifications — written documents describing the equipment, the cabling, the standards it must meet, and how it must be installed and tested.
  • Coordination — working with your architect, your builder and other trades, so the technology is planned into the building — in the walls and ceilings — rather than added as an afterthought.
  • System integration — making sure the different systems fit together: cameras with access control, phones with the network, paging with the alarm systems, and all of it on the cabling that supports it.

The design is reviewed with you before anything is bought or installed, so you know what you are getting, and why.

The problems it solves

  • Technology added one piece at a time. A camera here, a phone there, a new Wi-Fi box when the old one fails — and nothing quite fits together. A design brings it all under one plan.
  • Surprises during construction. When technology is not planned into a building, cables are run late, equipment does not fit, and changes cost time and money. A design catches those problems on paper, where they are cheap to fix.
  • Contractors working without a plan. Without drawings and specifications, each trade makes its own decisions, and the result is a system that is hard to use and hard to maintain. A design gives everyone the same plan to work from.
  • Systems that do not work together. Phones, cameras, access control and Wi-Fi all need the same cabling and network. Planning them together means they share it properly, instead of competing for it.
  • No room to grow. A building designed only for today’s needs runs out of capacity as soon as the team grows. A good design plans for growth from the start.
  • Nobody knows what was installed, or why. Without design documents, the knowledge leaves with the installer. A designed system comes with drawings and records that stay with the building.

What you get with Cable Connexions

  • A clear plan before you commit. Drawings and specifications that show what will be installed, where, and how it will work — in plain language, reviewed with you.
  • Design by people who install. The team that designs your system is the team that installs it, so the design is practical — not a drawing that cannot be built.
  • Coordination with your project team. We work with your architect, builder and other trades, so the technology fits into the building programme.
  • A full system report. On every job, you receive a full system report: what you have, where it is, and its warranty status — for every system and piece of equipment in the design.
  • Clear documentation. Written records and drawings of your systems, kept up to date as the project progresses, so the knowledge stays with your business and your building.
  • Managed services built into your support contract. Once the designed systems are installed, they can be looked after under a support contract, with regular checks and help when something needs attention.
  • Work done on a handshake. We show up, do the work right, and stand behind it — a way of working we have kept since 1995.

What to expect

  1. We walk your facility with you. We listen to what the building is for, how it is used, and what you want the technology to do — now and in the future.
  2. We assess what is there. Existing systems, cabling and infrastructure are checked, and we put together your full system report.
  3. We design the systems. Drawings and specifications are prepared, showing equipment, cabling and how the systems fit together — and reviewed with you in plain language.
  4. We coordinate with your project team. The design is shared with your architect and builder, so the technology is planned into the building work.
  5. We install to the plan, test it, and hand over your report. The systems are installed as designed, tested, and documented. Then ongoing support is there when you need it.

Questions clients ask

Do we need a design for a small job?

Not always. A single room or a small addition may only need a simple plan. A whole building, a renovation or a new site should have a proper design — that is where the costly surprises happen.

What drawings and documents do we get?

Plans showing where equipment and cabling go, and written specifications describing what is to be installed and how it must be tested. You keep them, and they stay with the building.

Can you work with our architect or builder?

Yes. That is a normal part of the work. We share drawings and specifications with your project team, and coordinate so the technology is planned into the building work.

Do you design for new construction and for existing buildings?

Both. New construction is planned from the drawings, and existing buildings are designed from a walk-through and a check of what is already there.

How long does the design take?

It depends on the size of the building and how many systems are involved. We will give you a clear picture of the steps and the timing after the first walk-through.

Can you also install what you design?

Yes — that is how we normally work. The team that designs your system installs it, tests it, and then looks after it under a support contract.

Get in Touch!

Call Cable Connexions at (443) 224-6764 or 1-800-373-1330, or visit our Support page. Tell us what is not working, or what you would like to improve, and we will walk your facility with you.

error: Content is protected !!